7. Rotate the front bezel out and disconnect the front panel cable and the mailslot sensor cable.
NOTE
A tab on the top of the mailslot sensor cable must be released
before the cable can be unhooked. Insert a small screwdriver
and push this tab down (see inset in Figure 6).
8. Remove the RFI shield.
Note
The cables/connectors for the additional drive are already in
place in the jukebox. You will only have to mount the drive
and connect it to the cables.
8
*****
Front Panel Tilted out
*****
Figure 6: Front panel tilted out
Need help?
Do you have a question about the Surestore 40fx - Optical Jukebox and is the answer not in the manual?
Questions and answers