Figure 13: Connecting Cables to the SCSI rpeater/converter PCA
2. Rotate the interface module up against the jukebox chassis, insert and tighten
the 4 T-20 mounting screws.
Caution
Make sure that the cables are not pinched by the side of the
interface module, and can be moved freely.
3. Replace cables and terminators as required by customer needs.
Note
The C1104F/G/H (1/2 capacity) jukebox was shipped with a
single-ended and a differential terminator. This capacity
upgrade includes additional single-ended and differential
terminators for use on the new interface PCA, if necessary.
7. Install the new controller PCA.
Figure 14: Location of the controller PCA
15