Japan Denan Law Cordset Caution; European Weee Statements - HP StorageWorks XP12000 - Disk Array Owner's Manual

board, and on the 16-port Fibre Channel Adapter board and 16-port FICON board for connection
to a fibre communications network.
In the USA, the OLM is certified as a Class 1 laser product conforming to the PRT requirements
contained in the Department of Health and Human Services (DHHS) regulation 21 CFR, Subchapter
J. The certification is indicated by a label on the plastic OLM housing. Outside the USA, the OLM is
certified as a Class 1 laser product conforming to the requirements contained in IEC 825-1:1993
and EN 60825-1:1994, including Amendment 11:1996.
The following figure shows the Class 1 information label that appears on the plastic housing of the
OLM.
CLASS 1 LASER PRODUCT
Complies with
21 CFR 1040.10 and 1040.11
Each communications port consists of a transmitter and receiver optical subassembly. The transmitter
subassembly contains an internal semiconductor laser diode in the wavelength range of 770 to 850
nanometers. In the event of a break anywhere in the fibre path, the OLM control system prevents laser
emissions from exceeding Class 1 levels. Class 1 laser products are not considered hazardous.
WARNING!
There are no user maintenance operations, service operations, or adjustments to be performed on the
Optical Link Module.

Japan DENAN law cordset caution

Please use the supplied power cord. The power cord may not be used with other products.

European WEEE statements

Czech
Danish
XP12000 Disk Array Owner's Guide 39