Programming Of Ringing Signals - Ericsson Dialog 3213 User Manual

Program
Access 1
( 0 - 6 )
Access 1
Program
Program
Access 1
Program
Dialog 3213

Programming of ringing signals

You have 6 programmable ringing signals on your telephone.
The different signals can be programmed on access lines,
additional lines and multiple represented lines.
Press
Press the corresponding line key
A digit (0-6) is shown in the display.
Select the ringing signal you want to use according to the
list below
0 = Silent.
1 = Periodic ringing signal.
2 = Delayed periodic ringing signal.
3 = One muted ringing signal.
4 = One muted delayed ringing signal.
5 = Immediate speech connection with single tone burst
controlled by function key.
6 = Immediate speech connection with single tone burst.
Note: Options 5 and 6 are not available for multiple
represented lines.
Press
Press to finish programming
Press to clear the display during programming
To verify a ringing signal
Press
Press the corresponding line key
A digit (0-6) is shown in the display.
Press to finish programming
Programming and Adjustments
69