Video Frame Capture View - Canon PIXMA MG6320 Online Manual

Video Frame Capture View

You can capture video frames to create still images. You can also print the captured still images.
Switch to the Video Frame Capture view by one of the following operations.
• Select a video in Day View of the Calendar view, the Event view, or folder view, then click Video
Frame Capture at the bottom of the screen
• Click Video Frame Capture in Global Menu when video frame capture is in progress
Important
If videos do not appear, check the system requirements and file formats. Refer to
details.
Not available on Windows XP SP2 and Windows Vista (without service packs) when ZoomBrowser
EX Ver.6.7 or later is installed.
Video color tones changed via the settings of the graphic driver (video card) or its utility are not
reflected in captured still images. Therefore, color tones may differ between videos and captured still
images.
(1) Preview Area
(2) Captured Images Area
(3) Operation Buttons
(4) Display Size Setting Bar
(5) Still Image Capture Panel
(1) Preview Area
Displays the preview of a video.
Displays the video playback progress. The current playback time appears to the right of the slider.
You can drag the slider to move the video forward or backward.
When you switch the still image capture panel to the Capture (multiple) panel, the
Capture Range) and
start and end positions to automatically capture multiple images by moving these marks. Place the
cursor over the mark to display the time code.
(2) Captured Images Area
Displays the thumbnails of still images captured from the video. The
thumbnails of corrected still images.
(Left Scroll)/(Right Scroll)
(End Time of Capture Range) marks below the slider appear. You can set the
(Playback Slider)
(Correction) mark appears on the
"File Formats" for
(Start Time of