Table of Contents
Advertisement
8.2 LDAP Configuration 2
1. Use KDC used for User Authentication as LDAP Server:
2. LDAP Server IP Address/Name: _______________________________________________
3. LDAP Server Port: _______
□
4. SSL is required:
5. LDAP Certificate Validation:
6. Information from the card used for the lookup:
□
User Principal Name – 12345678@mil
□
RFC822 Name – joe.smith@branch.us.mil
□
Subject Name – CN=SMITH.JOE.12345678, OU=Contractor, OU=PKI,
OU=DoD, O=U.S. Government, C=US
□
EDIPI – 12345678
7. LDAP attribute representing the data read from the card:
___________________________________________
8. Search Base:
_____________________________________________________________________
9. Access rights needed to access the LDAP directory:
□
Anonymous
□
User's Credentials (Cannot be used in Pin Only mode)
□
Service Account
Version 2.0.0
PKI Pre-Installation Guide
(Typically: 389 for non-SSL, 636 for SSL)
(If required, please have the SSL certificate available.)
(Only necessay is SSL is being used.)
□
Never
□
Try
(Typically something like "ou=installation,dc=branch,dc=mil")
Distinguished Name:_______________________________________
Password: _________
□
(If yes, skip item 2.)
□
Allow
□
Demand
To be provided at installation _________
Page 36
Advertisement
Table of Contents
