Lexmark X782 Installation And Configuration Manual page 30

The following table lists each setting and the corresponding Pre-Installation Section/Item that
contains the value needed for that field.
Setting
User Validation Mode
DC Validation Mode
OCSP Responder URL
OCSP Proxy URL
OCSP Responder Certificate
OCSP Responder Timeout
Use MFP Kerberos Setup
Kerberos Realm
Kerbeos KDC
Kerberos Domain
Version 2.0.0
Corresponding Pre-Installation Guide Section/Item
Section 3.2
Section 3.2.2.1.1
Section 3.2.2.1.1 Item 1
The format should be http://<ipaddress>:<port>. Separate
multiple URLs with a comma.
Section 3.2.2.1.1 Item 2
The format should be http://<ipaddress>:<port>. Only
one value is allowed.
Section 3.2.2.1.1 Item 4
Section 3.2.2.1.1 Item 3
Section 3.2.2 Item 2
If "One Kerberos Realm" is selected, uncheck this box;
the next three settings should be filled in. Otherwise,
check this box and the following three settings are not
needed.
Section 3.2.2 Item 2
Section 3.2.2 Item 1
If there are multiple KDCs, enter them all here separated
by a comma.
The default value of "mil,.mil" should be sufficient. If
Manual Login is allowed, other values may be needed
Page 24