Installing Extended Fabric - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Installing Extended Fabric

The installation of Extended Fabric requires an Extended Fabric license on each
switch in the fabric. A license may have been installed in the switch at the factory.
If not, follow the procedure below to obtain a license key.
This chapter provides the following information:
Extended Fabric Version 3.1.x/4.1.x User Guide
Verifying Activated
Activating the License Using Web
Activating the License Using
Obtaining Optional Software License Keys from
Licenses, page 14
Tools, page 16
Telnet, page 17
2
HP, page 18
13