Copy To; Copies; Scale; Darkness - Lexmark X746 Copy Manual

Copy to

This option opens a screen where you can enter the paper size and type on which your copies will be printed.
•
Touch the paper size and type that matches the paper loaded.
•
If the settings for "Copy from" and "Copy to" are different, then the printer automatically adjusts the Scale setting to
accommodate the difference.
•
If the paper type or size that you want to copy onto is not loaded in one of the trays, then touch Manual Feeder, and manually
load the paper in the multipurpose feeder.
• When "Copy to" is set to Auto Size Match, each copy matches the paper size of the original document. If a matching paper
size is not in one of the trays, then Paper size not found appears and prompts to load a paper in a tray or multipurpose
feeder.

Copies

This option allows you to set the number of copies to be printed.

Scale

This option creates an image from your copy that is proportionally scaled anywhere between 25% and 400%. Scale can also be
set for you automatically.
• When you want to copy from one size of paper to another, such as from legal‑size to letter‑size paper, setting the "Copy
from" and "Copy to" paper sizes automatically changes the scale to keep all the original document information on your copy.
• Touch the left arrow to decrease the value by 1%; touch the right arrow to increase the value by 1%.
•
Hold your finger on an arrow to make a continuous increment change.
•
Hold your finger on an arrow for two seconds to cause the pace of the change to accelerate.

Darkness

This option adjusts how light or dark your copies will turn out in relation to the original document.

Sides (Duplex)

Use this option to select duplex settings. You can print copies on one or two sides, make two-sided copies (duplex) of two-sided
original documents, make two-sided copies from one-sided original documents, or make one-sided copies (simplex) from two-
sided original documents.

Collate

This option keeps the pages of a print job stacked in sequence when printing multiple copies of the document. The factory default
setting for Collate is on; the output pages of your copies will be ordered (1,2,3) (1,2,3) (1,2,3). If you want all the copies of each
page to remain together, turn Collate off, and your copies will be ordered (1,1,1) (2,2,2) (3,3,3).

Content

This option lets you set the original document type and source.
Choose content type from Text, Text/Photo, Photo, or Graphics.
•
Text—Use when the content of the original document is mostly text or line art.
• Graphics—Use when the original document is mostly business‑type graphics such as pie charts, bar charts, and animations.
Copy guide
Page 2 of 4