Nikon D5000 User Manual page 83

Release mode determines how the camera takes photographs: one at a time, in a
continuous sequence, with a timed shutter-release delay or remote control, or with
reduced camera noise.
Place the cursor in the information display.
If shooting information is not displayed in the monitor, press the [] button.
Press the 4], button to place the cursor in the information display.
[] button
Information display ,B, button
2
3
Display release mode options.
Highlight the current release mode in the
information display and press _).
Choose a release mode.
Highlight one of the following options and press
@.
Mode
[] Single frame
Continuous
Self-timer
2s Delayedremote
Quick-response
remote
Quietshutter-
[]
release
Camera takes one photograph each time shutter-release button is
)ressed.
Camera records about 4 frames per second while shutter-release
button is held down.
U_ for self-portraits or to reduce blurring caused by camera shake
(_ 67).
Optional ML-L3 wireless remote control required. Shutter is
released after two-second delay (_ 67).
Optional ML-L3 wireless remote control required. Shutter is
released immediately (_ 67).
As for [] (single frame) except that camera makes no sound until
finger is removed from shutter-release button after shooting and
beep does not sound when camera focuses, keeping noise to a
65