Table of Contents
Advertisement
3
Check the number
of exposures
remaining.
The information
display and viewfinder
show the
number of photographs
that can be stored on
the memory card. Check the number of
exposures remaining.
If there is not enough memory to store
additional
photographs
at current settings, a
warning
will be displayed.
No further
pictures
can be taken until the memory card has been
replaced (_ 22) or photographs
have been
deleted (_ 40, 126).
When enough memory remains on the memory
card to record a thousand
or more pictures at
current settings, the number of exposures
remaining
will be shown in thousands,
rounded
down to the nearest hundred
(e.g., if there is
room for 1,260 exposures, the exposure count
display will show 1.2 K).
[]
Auto Meter Off
At default settings, the viewfinder
and information
display will turn off if no operations
are
3erformed
for about eight seconds (auto meter off), reducing the drain on the battery.
Press
the shutter-release
button
halfway to reactivate
the display (_ 32).
Exposuremeters on
Exposuremeters off
_
Exposuremeters on
The length
of time before the exposure
meters turn offautomatically
can be adjusted
using
Custom Setting c2 (Auto off timers;
_ 157).
[]
Image
Sensor Cleaning
At default settings, the camera vibrates
the low-pass filter covering
the image sensor to
remove dust when the camera is turned
on or off.
29
Hide quick links:
Advertisement
Chapters
Table of Contents
