Nikon COOLPIX AW100 Reference Manual page 27

m
o
Map Menu
Points of interest (POI) (Recording and Displaying Location
Name Information)
Display ([_88) ") MENU button -) _ tab ([_11 -) Points of interest (POl)
a
map
)
This shows how to set the PO[ (point of interest, location name information).
Option Description
When set to On, the [ocadon name information is recorded on the
_ictures to be shot.
Embed POI The default setting is Off.
The location name information can be recorded on a still image or
video.
When set to On, the location name information is displayed on the
Display POI shooting screen or playback screen ([_6, 8).
The default setting is Off.
Set the display level of the [ocadon name information. A higher
display [eve[ shows more detailed regional information, and a lower
display [eve[ shows regional information for a wider area (such as
Level of detail country names).
When set to level 1, country names are displayed. When set to ]evd 6,
landmark names (facilities) are displayed. The information displayed
for levels 2 to 5 vary depending on the country where the map is
displayed.
If Update POI is selected during playback mode, the location name
information recorded on the image can be changed.
• When level 6 is selected, press the multi selector • or • to change the
Edit POl landmark name.
• To change the map information level, press the multi selector • or V.
]f Remove POI is selected, the location name information recorded
on the image is deleted.
[] POI Display
If there is no location name in_rmation in the display level that was set," "is displayed.
_60