Panasonic SC-AK240 Operating Instructions Manual page 8

$
F--
©
cc
=_,
OPEN/CLOSE
A
Mull hGLE
CHANGE CHANGE
DiSC -
PROGRAM - - Numeric
buttons
REPEAT -
DEL
=1, CLEAR
_/_ll, CD
CURSOR (_ or _),
ALBUM (_ or _) - I,_, REW/v,
_b.I, A/FF
INTRO - ENTER
MARKER - TITLE SEARCH
DISPLAY
By main unit only
While one disc is playing, you can change the discs in other
trays.
1 Press [_, SINGLE CHANGE].
2
Press [1 _ ~ 5 _] to select the desired tray.
3 Change the disc.
4 Press [_,, SINGLE CHANGE] again to close the tray.
You can select a desired disc display mode.
t_ttt_rx_l
Press [DISPLAY] during play or pause.
Press [DISPLAY, -DEMO] on the main unit during play or
pause.
Elapsed play time _ Remaining play time
Elapsed Remaining
play time "_ play time .._ Album Name
t
Tag (Artist) _ Tag (Track) _ Tag (Album) _ Track Name
Note:
* When track number 25 or greater is playing, remainingplay time
display shews "- -:- -".
* When a title is longer than 9 characters, it will scroll across the
diep,ay The scro,Ung wi,, s tart a fter e very a eeconds.
.... , "NO TAG" is displayed if titles with tags have not been entered,
, Maximum number of displayable characters: approximately 32
, This unit can display album, track and artist name with WMA tags
and MP3 ID3 tags (version 1,0 and 1,1).
* Titles containing text data that the unit does not support cannot be
displayed.
........ ID3 is a tag embedded in MP3 track to provide information about
the track,
........ Titles entered with 2-byte code cannot be displayed correctly on
this unit.
This function allows you to program up to 24 tracks.
(3A}
1 Press [_,/H, CD] and then [_, CLEAR].
2
Press [PROGRAM].
"PGM" appears.
3
Press [DISC] and then [1] - [5] to select the disc.
4 Press the numeric buttons to select your desired
track.
Repeat steps 3 to 4 to program other tracks.
5 Press [=,/H, CD] to start play.
1 Press [DISC] and then [1] ~ [5] to select the disc.
2
Press [u, CLEAR].
3
Press [PROGRAM].
4 Press [ALBUM (z_ or_,_)] to select your desired
album.
To select an album directly, press the numeric
buttons after pressing [ALBUM (/-- or .-_)].
5 Press [I-._-_, REW/v] or [_,-I, A/FF] to select the
track.
To select a track directly, press the numeric buttons
after pressing [I-_-_, REW/V] or [_,-I, A/FF].
Press [ENTER].
Repeat steps 4 to 6 to program other tracks.
7 Press [=,/H, CD] to start play.
For two-digit track, press [=>10] once then the two digits.
For three-digit track, press [>10] twice then the three digits.
cancel Press [PROGRAM] in the stop mode,
program mode
replaythe Press [PROGRAM] then [viii, CD] in the stop
program mode,