Panasonic HDC-SDT750PP Operating Instructions Manual page 3

2
Touch [RECORDER] on the screen of this unit.
• When you select an option other than [RECORDER], reconnect the USB cable.
• When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen
to turn the LCD monitor on.
3
Dubbing through operations on the Blu-ray disc recorder or high-
definition (AVCHD) compatible DVD recorder.
• When the unit is accessing the SD card, card access icon ( _ ) appears on the unit
screen or the access lamp is on.
• Be careful not to disconnect the USB cable, AC adapto[ o[ battery while the unit is
accessing the SD card, as this may result in the loss of recorded content.
• Dubbing scenes recorded in 3D
When dubbing with high-definition (AVCHD) picture quality, you can store 3D video. The
v dee s recorded una tered n s de-by-s de format.
• If the dubbed video does not change to 3D video, make the necessary settings on the TV.
(For further details, please read the operating instructions for the TV.)
• insert the USB cable securely all the way. It will not operate properly if it is not inserted all
the way.
• Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
• For details on dubbing and playback methods, read the operating instructions of the
Blu-ray disc recorder or DVD recorder.
• When you connect the unit to a Blu-ray disc recorder, a dubbing operations screen may
appear on the television connected to the Blu-ray disc recorder. In this case as well,
perform the operations of steps 1 to 3.
• You cannot change the mode of the unit or turn off the unit while it is connected to a Blu-ray
disc recorder or DVD recorder. Disconnect the USB cable before performing either of these
operations.
• If the battery runs down during dubbing, a message will appear. Operate the Blu-ray disc
recorder to cancel the dubbing.
121
VQT3B18