Negative/Positive Transposer - Panasonic Palmcoder IQ PV-IQ225 Operating Instructions Manual

This |eature helps stabilize the picture in situations
such as walking or shooting from a moving vehicle.
Before you begin...
• Set the POWER switchto CAMERA.
_NORMAL_
Press EIS to activate the D.E.I.S. function.
I
i
!
("EIS" will appear in the EVF.)
• The image in the EVF will be enlarged IE _ 1
slightly and the shutter speed will be IS
automatically adjusted from 1/80 to 1/250
according to the brightness of the subject.
Press EIS again to cancel.
• You may also use the High Speed
Shutter function (from 1/100 to 1/10000).
The shutter speed you select remains
active even after you cancel the D.E.I.S.
function.
• Be sure that the DoE.I.S. is turned off
when not needed.
D.E.I.S. may not function when...
• Palmcorder movement is too extreme.
• recording a subject with distinct horizontal
or vertical stripes.
• recording in low light situations.
• EIS indicator flashes when the light level
is inadequate.
• recording a subject under a great amount
of fluorescent light.
• recording a scene with very fast motions.
This special effect feature allows you to change the picture
from a positive to a negative image.
Before you begin ....
• Set the POWER switch to CAMERA.
Press NEG/POS.
You may now view or record the image.
3O