Manual Programming - Panasonic CT-31G30T Operating Instructions Manual

Manual Program
ACTION
Displays and Exits Menus
Located On Remote Control
Selects or Adjusts
FeaturesWhen
Menuis Displayed
Selects Desired
Feature When
Menu is Displayed
Manual Programming
- This feature allows
you to select which channels are placed into Channel
Scan Memory.
1. Press the ACTION button to display the Main Menu.
2. Press the CH DOWN and VOL RIGHT buttons to
select the Set-Up Icon.
3. Press the ACTION button to display the Set-Up
Menu.
MENU ICON+TEXT
ON MUTE NO
SET TIME : AM
ANTENNA CABLE
AUTO PROGRAM NO
MANUAL PROGRAM NO
[] MODE OFF FIELD 1
4. Press the CH DOWN button to select "MANUAL
PROGRAM".
5. Press the VOL LEFT or RIGHT button to displaythe
Manual Programming Menu.
I MANUAL PROGRAM I
ENTER CHANNEL 3
• TO ADD
4 TO DELETE
6. Use the CH UP or DOWN button or the Remote
Keyboard =(3 through 9" buttons to select channels.
7. Press the VOL RIGHT button to add channel(s) to
memory (Blue). Press the VOL LEFT button to
delete channels from memory (Yellow).
8. Repeat steps 6 and 7 to continue adding or deleting
channels.
9. Press the ACTION button twice to exit the Manual
Programming Menu.
- 25 -