Auto Programming - Panasonic CT-20S2S Operating Instructions Manual

Auto Program
ACTION
Displays and Exits Menus
Auto Programming
- This feature allows you
to place all channels with a video signal into Channel
Scan Memory. Press the CHANNEL (CH) UP or DOWN
button and only those channels with a signal will be ac-
cessed.
1. Press the ACTION button to display the Main Menu.
2. Press the CH DOWN and VOL RIGHT buttons to
select the Set-Up Icon.
3. Press the ACTION button to display the Set-Up
Menu.
Located On Remote Control
MENU
ON MUTE
SET TIME
ANTENNA
AUTO PROGRAM
MANUAL PROGRAM
MODE
ICON+TEXT
NO
--- • -- AM
CABLE
NO
NO
OFF FIELD 1
Selects or Adjusts
Features When
Menu is Displayed
Selects Desired
Feature When
Menu is Displayed
4. Press the CH DOWN button to select "AUTO PRO-
GRAM".
5. Press the VOL LEFT or RIGHT button to start Auto
Programming. Channels will automatically advance
until all channels have been scanned.
6. Press the ACTION button twice after completion of
Auto Programming to exit Set-Up Menu.
NOTE: Channel numbers with signal present will turn
blue which indicates stored in Channel Scan
Memory.