Connecting To A Wireless Network; Figure 2-6 Site Survey; Table 2-2 Site Survey - ZyXEL Communications ZyAIR G-200 User Manual

The following table describes the fields in the table.
FIELD
SSID This field displays the SSID (or name) of each wireless device.
Signal This field displays the signal strength of each wireless device.
Channel This field displays the channel number used by each wireless device.
Security This field shows whether the wireless security is activated (WEP, WPA-PSK, WPA or
802.1x) or inactive (None).
BSSType This field displays the wireless network type as Infrastructure or Ad Hoc of each wireless
device.
Infrastructure: the ZyAIR associates to an AP.
Ad-Hoc: the ZyAIR associates to a peer ad-hoc computer.
Mode This field displays the wireless standard (802.11b or 802.11g) of the wireless device.
BSSID This field displays the MAC address of the wireless device.
Search Click Search to scan for available wireless device within transmission range.
Connect Click Connect to associate to the selected wireless device.
OK Click OK to apply the changes and close the screen.
Cancel Click Cancel to discard all changes and close the screen.
Help Click Help to display on-line help screen.

2.3.1 Connecting to a Wireless Network

Follow the steps below to connect to a network.
Using the ZyAIR Utility

Figure 2-6 Site Survey

Table 2-2 Site Survey

DESCRIPTION
ZyAIR G-200 User's Guide
2-5