Blade Drive; Tire Size; Tire Pressure; Dimensions (Tractor And Mower) - Walker MC (20 HP) Owner's Manual

Specifications
MODEL
TRANSMISSION (continued)
Neutral
Final Drive
Transmission Fluid
Factory Service
Alternate Transmission Fluid
Transmission Fluid Capacity
Transmission Cooling
Ground Travel Speed
Forward m.p.h. (km/h)
Reverse m.p.h. (km/h)

BLADE DRIVE

PTO Shaft
Blade Spindle
Blade Drive Clutch and Brake
Max. Blade Speed
[22 in. (56 cm) Blade] @ 3600
RPM Engine

TIRE SIZE

Deck Caster Wheel
36, 42, 48, 56
52, 62
Deck Caster Wheel (Optional)
36, 42, 48, 56
Drive
Drive (Optional Narrow Tire)
Rear

TIRE PRESSURE

Deck Caster Wheel
Drive
Rear

DIMENSIONS (Tractor and Mower)

Length
36 in. (91 cm) GHS Model
42 in. (107 cm) GHS Model
4
MC
Transmission Release by Manual Dump Valve
Gear Drive Axle
Mobil 1 Synthetic Motor Oil (15W-50)
SAE 30W Straight Viscosity Motor Oil
1 qt (1 liter)
Cooling Fan Mounted on Drive Pulley
0-5 (0-8) Infinitely Variable
0-5 (0-8) Infinitely Variable
Quick Disconnect Spline Shaft with Two High-Speed U-Joints
Each Blade (2) Mounts Direct on Peerless Right Angle
Gearbox with Tee Gearbox in Center Connected to PTO Shaft
(Complete Geared Drive, Peerless Model 1000 Gearboxes)
Manual Belt Tightener Clutch and Band Brake
[Stops Blades within Five (5) Seconds of Disengagement]
2900 RPM
[16700 FPM (5090 m/min)]
8 x 3.00-4 Pneumatic (4-Ply)
11 x 4.00-5 Pneumatic
8 x 3.00-4 Foamed Rubber
18 x 8.50-10 (4-Ply Low-Profile)
18 x 7.00-8 (4-Ply)
13 x 6.50-6 (4-Ply)
20 PSI (137 kPa)
15 PSI (103 kPa)
20 PSI (137 kPa)
87 in. (221 cm)
89 in. (226 cm)