Walker MC (20 HP) Owner's Manual page 54

Maintenance Instructions
Ident
No. Location
1 Deck Caster Wheel Fork Pivot
2 Deck Caster Wheel Bearing
3 Tee Gearbox, Deck
4 Blade Drive Gearbox
5 Universal Joint Shaft Assembly
6 Pivot Assembly, Tilt-Up Deck
7 Deck Support Arm Socket
8 Body Hinge Point
9 FSC Actuator Rod Pivot Pins
10 FSC Lever Pivot
11 FSC Lever Fork
(Grease Slide Area)
12 (FSC) Friction Body Pivot
13 Steering Lever Pivot
14 Deck Support Arm Pivot
15 Deck-to-PTO Coupling
(Grease Slide Area)
16 Universal Joint Tube Assembly
17 Universal Joint Quick Connect
Spline (Grease Slide Area)
18 Parking Brake Lever
19 Gear Axle
20 Belt Tightener Pivot,
Jackshaft Drive
21 Clutch Actuator Push Rod
22 PTO Clutch Lever Pivot
23 Belt Tightener Pivot,
PTO Clutch
50
Lubrication No.
Type Places
Grease 2
Grease 2
Oil* 1
Oil* 2
Grease** 1
Grease 4
Grease 2
Oil 2
Oil 2
Grease 1
Grease 1
Grease 1
Grease 4
Grease 2
Grease 1
Grease** 1
Grease 1
Grease 1
Oil*** 2
Grease 1
Grease 2
Grease 1
Grease 1
Ident
No. Location
24 Brake Actuator Rod and Brake
Band Pivot Pins (Clevis)
25 Brake Actuator Pivot
26 Catcher Hinge Point
27 Choke Control Cable Ends
28 Throttle Control Cable Ends
29 Engine Oil
30 Belt Tightener Pivot,
Blower Drive (GHS Model Only)
31 Belt Tightener Pivot,
Ground Drive
32 PTO Gearbox Dipstick
33 Hydrostatic Drive
34 Choke Control Pivot
35 Throttle Control Pivot
*
Gearboxes are permanently lubricated and
sealed requiring no scheduled lubrication. Oil
level should be checked only when an oil leak
is noted. Refer to Mower Deck Gear box Lu-
brication in this section.
**
Grease every eight (8) hours.
***
Refer to Gear Axle Lubrication, Engine Oil,
Tractor PTO Gearbox Lubrication, and Hy-
drostatic Transmission Fluid in this sec-
tion.
NOTE: DGHS42 Tilt-Up Deck is shown for reference.
For other Deck Lubrication Points, Refer to
Deck and Carrier Frame Illustrated Parts Man­
ual.
LUBRICATION
Lubrication No.
Type Places
Oil 3
Grease 1
Oil 2
Oil 2
Oil 2
Oil*** 1
Grease 1
Grease 1
Oil*** 1
Oil*** 2
Oil 1
Oil 1