Walker DB6660 Owner's Manual page 25

Assembly Instructions
6. Complete the wiring by connecting the wiring
harness ends to the toggle switch and to the ac-
tuator motor of the implement hitch.
Wire Harness
Connector
Complete Implement Hitch Wiring
7. Move the implement lift switch backward to
raise the implement hitch to the UP position.
8. Move the implement lift switch forward to lower
the implement hitch to the DOWN position.
9. Raise and lower the hitch a few times to check
the operation and make sure it moves smoothly.
If not, make sure the wiring harness ends are
connected properly and securely. Refer to Im-
plement Hitch Wiring Diagram illustration.
Actuator Motor
Connector
21