Using The Channel Setup - Sony WEGA KV-20FS100 Operating Instructions Manual

Operating Instructions
Using the Channel Setup Menu
To access the Channel Setup menu, refer to the following steps:
To Display To Highlight [_
MENU
To Select
Favorite
Channels
Quick access
to favorite
channels
Press <> to open the Favorite Channels menu:
1 Use the _ or _, buttons to select the position (1-5) where you want to set
a favorite channel, then press CD.
2 Using the ff or _ button, select the desired channel.
3 Press c2D to change to the channel selected.
4 Press _ to return to the Channel Setup menu or press _)u to exit.
Z:_ To use Favorite Channels: Exit all menus and press c_. Presso or _ to move the cursor to
the desired channel number and press cD.
Cable On: Select if you are receiving
cable channels with a CATV cable.
Off: Select if you are using a TV antenna.
After changing your cable settings, you will need to perform Auto Program. When
Channel Fix is set, you will not be able to use your Cable settings.
Channel Fix 2-6: Select when you want to control all channel selection through a cable
box or VCR. Select the appropriate channel (usually 3 or 4) and use the
cable box's or VCR's remote control for channel selection.
Video 1 : Select from available video inputs when you have connected
video equipment (e.g. satellite receiver) and you want your TV fixed to it.
Off: Channel Fix is not set.
Auto Program Press <> to perform Auto Program.
The TV will scan through all available channels and program receivable
channels.
2O