Sony WEGA KV-20FS100 Operating Instructions Manual page 17

Operating Instructions
TV and Satellite Receiver
From
cable/
antenna
2
Satellite Receiver
AUDIO R AUDIO L VIDEO
Satellite J LINEOUT I @ @ @ I
antenna / ' T T T
cable
3
VHF_JHF
Rear of TV
(yellow)
-- Audio L (white)
-- Audio R (red)
1
Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2 Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on
your TV.
3 Using Audio/Video cables (not supplied), connect AUDIO and VIDEO OUT on your
satellite receiver to AUDIO and VIDEO IN on your TV.
You can use the w_o button to switch between the VHF/UHF and VIDEO inputs.
For better picture quality, use S VIDEO instead of the yellow Audio/Video cable. S VIDEO
does not provide sound; the audio cables must still be connected.
8