Danby Designer DAC9006DE Use And Care Manual page 7

.
Assembly of the Upper Channel, to
Cabinet. (Factory insta!led on some models)
"L" Shaped Top Channel: Install the "L"
shaped channel to the top of the cabinet as
shown In Fig,,3 usingfour (4) 3/8" screws.
__ 318"Screw
MountingBracket
' Shaped ChBnnef
FIg_ 3 (Factory rnstaIJsd)
2. Assembly of the Slde Curtains to
Cabinet.
• Extend the shutter from the shutter frame and
slide it Into the shutter guide on the side
channel of the air conditioner as shown In F_g. 4 .
- Slide the shutters Into the top ("L" Shaped) and
bottom ("U" Shaped channeiso The shutters are
Identified (on frame) as left & right,
31
t
Shutter
Shutter Frame
I
FIg_4
Completing the Installation
Cut the foam (non adhesive) sealing strip to
fit the area of the window sift that the air
conditioner will rest on.
3a.
$
Completing the Installation (cont'd)
Carefully place the air conditioner tnto the
window with the "U' shaped mounting bracket
(on top) positionedin front of the upper window
sash. The bottom of the cabinet should be
positioned on the "recessed" portion of the
window frame° Pull the window down until it
rests just behind the front flange of the (top) "L"
shaped mounting bracket. See Fig, 5
Expand the shutter frames (fully) on each side
and secure the top of the frames to the window
sash using one 3/4" screw on each side and one
in the "L" shaped mounting bracket, Fig 5
Secure the shutter clamp on each stde of the
(lower) shutter and secure to window stl! using
one 3/4" screw on each side. Fig5
"L" Shaped
Mounting
Bracket
Place the second foam seaUng strip to fit the
opening between the Inside and outsidewindows
then attach the safety lock to the outside
window frame using one 3/4" screw,, See Fig 6,
PLEASE NOTE: Window applications comb In a
variety of different styles_ Therefore, it may be
necessary to modify or improvise your particular
tnstaflationo