Installation Of The Cabinet - Danby Designer DAC6003D Use And Care Manual

? 0 _, o o o 0 o o o o r_'_ _':=:=
Outer Walt Coas_rucUon
FIg_18
5. Installation of the Cabinet
( All Models)
A, Place the air conditioner cabinet inlo the w_ndow
with the "U °shaped mounting channel (on top)
positioned in front of the upper wlndow sash. The
"U" shaped channel on the botlom of the cabinet
should be positioned in the "recessed" portion el
the track located at the front of the window
brackets. Pull the window down until it rests just
behind the Iront flange of the (top) "U' shaped
mounting channel. See Fig, 14.
Be Align one hole in the bottom of the cabinet wllh
one hole in the bracket assembly_ Secure the
cabinet !o the bracket using a 1/4" screw
provided. Repeat the same procedure on the
opposite side of the cabinet Fig. 15
C, Checkto make sure the"pitch" (angle) of the
cabinetls slanted slightly downward on the
outside, If necessary, re-adjustthe levelling
screws In the mounting bracket,Fig..18
D, Cut the flrs_tfoam sealing strip to fit the
underside (bottom) of the lower wlndow sash.
Remove the peel-off, backing on lhe foam and
attach the foam stdp to the sash. See Fig. 13.
WindowSash
"L" Shaped Foam Sllip
Moun_n_
Channel
Fig. 14