S-Video & Component Video - CyberHome DVR 1600 Operation Manual

SoVideo & Component Video Connections
SoWDEO is a higher quaEity connection than standard composite video, and requires a special S-Video cable (not
included). The S-Video connector is distinguishable by its 4 pins, as shown below. Ufyour TV has an SWideo input,
it's recommended that you use this type of connection for better picture quality.
First, obtain a special S-Video cable. Connect the
S-Video output from the unit to the corresponding
input on your TV.
2
On your TV, select the S-Video input. This is
normally done by selecting "Video 2" or "AV2" with
the remote control On some TVs, this is done by
selecting a particular channel.
The Recorder
S-VIDEO CABLE
( NOT INCLUDED )
You can enjoy high quality picture reproduction by
using the component video output instead of S-Video
or Composite video output. Connect the cables per
the illustratiom
On your TV, select the component or
progressive scan input. This is
normally done by selecting "Video 2"
or "AV2" with the remote contro!. On
some TVs, this is done by selecting a
particular channel.
Change the Setup Menu/AN
Output/Scan Mode to Progressive if
your TV supports P-SCAN or
Interlace if it supports component.
COMPONENT VIDEO CABLE
( NOT INCLUDED )
The Recorder
GREEN
BLUE
10