Table of Contents
Advertisement
Component Video & Progressive
Scan Connections
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
m
Connecting
to a TV with
Component
Video
Inputs
Component
Video separates
the Video Signal into three separate "components",
resulting in a higher
quality picture than S-Video or Standard
Composite
Video. In order to use Component
Video, you
must use a TV equipped with Component
Video Inputs. You'll also need (3) Component
Video Cables
(included).
Component Video
Connectors
VIDEO
Step
1: Enter
the
Setup
Menu
to Change
the Video
Setting
With disc play stopped,
press the SETUP button on the Remote Control to enter
the DVD Player's
On-Screen
Setup Menu. Use the ARROW
keys to navigate
down to the VIDEO menu and press ENTER or Right Arrow Key. Use the
ARROW
keys again to proceed down to the OUTPUT setting. Press ENTER and
then use the UP/DOWN
keys to select YCbCr.
Press ENTER to confirm your
choice.
For Help On Using the Setup Menu, see pg 38.
Step
2: Connect
the
Player
using
the Component
Video
Cables
At this point, connect the separate
Component
Video Cables to the appropriate
jacks.
Normally, cables and jacks are color-coded
to make connection
easier. Power on TV and set your TV to the Video In
Channel associated
with the Component
Video inputs ("Video 3", "Input 3", etc.) Lastly, press the MONITOR
button
on the DVD player or Remote to switch the video mode to EXTERNAL
MONITOR.
You should now see the DVD
Player splash screen on your TV.
lrv
PROGRESSIVE SCAN/
COMPONENTVIDEOIN
Step
3: If You
Are
Using
a PROGRESSIVE
SCAN
TV
Now that you are using the Component
Video Outputs,
you can change the
OUTPUT
setting to enable Progressive
Scan mode. Do not change these settings
if you are not SURE your TV supports
Progressive
Scan.
Using the ARROW and ENTER keys, change the OUTPUT
setting to YPbPr.
The
DVD Player is now in Progressive
Scan mode. Exit the setup menu by pressing the
SETUP button.
Quick Tips
If you need to reset the
Player's
Video Settings to
factory defaults,
Reset the
player, Open the Disc
Cover and press "STOP -
2 - O - O- 2" on the
Remote Control.
[ ForHelp O.Usi.gtheSet.p Me..,see pg38. ]
18
Advertisement
Table of Contents
