Emissions Information - Craftsman 580.675511 Operator's Manual

Emissions information
Engines that are certified to meet the California Air Resources
Board (CARB) Emission Standards must display information
regarding the Emissions Durability Period and Air index. The
engine manufacturer makes this information available to the
consumer on emission labels. The engine emission label will
indicate certification information.
The EmissionsDurability Period describes the number of
hours of actual running time for which the engine is certified
to be emissions compliant, assuming proper maintenancein
accordance with the Operating & Maintenance instructions.
The following categories are used:
Moderate: Engine is certified to be emission compliant for
125 hours of actual engine running time.
Intermediate: Engine is certified to be emission compliant
for 250 hours of actual engine running time.
Extended: Engine is certified to be emission compliant for
500 hours of actual engine running time.
For example, a typical walk-behind lawn mower is used 20 to
25 hours per year. Therefore, the EmissionsDurability
Period of an engine with an intermediate rating would
equate to 10 to 12 years.
Certain engines wiii be certified to meet the United States
Environmental Protection Agency (USEPA) Phase2 emission
standards. For phase 2 certified engines, the Emissions
Compliance Period referred to on the Emissions Compliance
label indicates the number of operating hours for which the
engine has been shown to meet Federalemission
requirements.
For engines less than 225 cc displacement:
Category C = 125 hours
Category B = 250 hours
CategoryA = 500 hours
For engines of 225 cc or more:
Category C = 250 hours
Category B = 500 hours
CategoryA = 1000 hours
35