Usingthe Probe - GE JBP90 Owner's Manual

Usingthe probe. (on
some models)
For many foods, especially roasts and poultry,internal food temperature is the best test for donenes&
The temperature probe takes the guesswork out of roasting by cooking foods to the exact doneness you want
Use of pl-obes other than the one
pnwided with this prcxluct n_ly resuh
in damage to the probe.
Lrse the h,'mdles of file prohe and plug
when hlsening and removing them imm
the food and oudet.
The temperature probe has a
skewer-like probe at on e end and a
plug at the other end that goes into
the oudet in the oven.
Toavoiddamagingyourprobe,do not use
tongsto pull on the cable when removingit.
._4_ Toavoidbreakingtheprobe,makesure foodis
completelydefrostedbeforeinserting.
Topreventpossibleburns,do not unplugthe
probefrom the outlet until the ovenhas
cooled.
Neverleaveyourprobeinsidethe ovenduring
a self-cleaning cycle.
Donot store the probeid the oven.
.... Alter preparing the me'at and
placing it
"__[_1_\ on a trivet or on the broiler pan grk],
tbllow these din_clions for proper prot_,
pkacement.
Insert the probe complete b, into the
................. meat. It shoukl not touch tile Ixme,
tht or _'isde.
For Feasts with IlO
bone, insert tile probe
into the meatiest part of tile r(_ast, b_)r
bone-in ham or lamb, in._rt tile prolwe
into tile center of tile lowest laige mtlscle.
Insert the probe in to the center of dishes
such as meat loaf or cas,scroles.
Insert the probe into the mealie.st part of
the inner thigh from below and parallel
to the leg oft whole turke,,_
QQO®Q
(2)0(23(2SD
03(230(53(33
(D(DQ
®
@
18
How to Set the Oven I:or Roasting When Using the Probe (onsomemodels)
[]
[]
hz_sen the prohe completely into the
meal h should not touch tile bone,
tat or gristle.
Plug the probe into the outlet in the
oven. Make sure it's pushed all the
way in (:lose he oven tiool: Make
sure file probe cal)le ksnot touching
the broil element.
[] Touch the PROBEpad.
]
Touch
the ntll/lIH,_ pads to set Ihe
desired int(_r]_a] food or £n(:al
telnpel_ll ill c.
[] Touch
the BAKE pad.
] Tottch Ihe nunfl_('t pads to set the
desired oven tt+ml_tattlle.
[]
Touch the
STARTpad
Thed&olaywdl flash d the probeis thserted
into the outlet andyou havenot seta probe
temperature and touchedthe START pad
Al'ter tile internal tcmpet'ature of the
{bed reaches It)O°E the changing
internal tempm_ture will be shown
in the displa F
] Ddlen the intenlal romping/lure
of the food reaches the num|xzr
you have set, tile probe and the
oven tun} off and the ov¢211 c ont_-o]
sigmals. To slop the signal, touch
the CLE/IR/OFFpad. Use hot paris
u) remove the probe fronl tilt: fo(×l.
Do not use tongs to pull on it-
tile}, might damage it.
To change the oven t_:rllpt:ratttre during
the Roast cycle, Iouch the BAKE pad and
then the numlx'l pads to set the new
t_?mpei_lturc.
tf theprobeJsremovedfrom the foodbefore
the final temperatureis reached, a tonewill
soundand the dtsplayw_llflashuntil the probe
_sremovedhorn the oveA
You can use the timer even though you
cannot use breed oven operations while
using the probe