Option Menu Features Aspect Ratio Control; Cinema 3:2 Mode Setup - Zenith Z42PX2D Installation And Operating Manual

Operation
- Lots you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format.
When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be dis-
played.
- If you are viewing a picture with a !6:9 aspect ratio, you can't use the Horizon aspect ratio option.
- H_riz_naspectrati_isn_tavai_ab_ef_rC_mp_nent1-_(48_p/7__p/1_8_i)/RGB-DT_(48_p/72_p/1_8_i)/HDM_/DV_DTV
(720p/f 080i)/DTV(720p/1080i) input source
- In RGB-PC/DVI-PC input source, only use 4:3 or 16:9 aspect ratio are available.
- Nero: if a fixed image is displayed on the screen for a long time, it image may become imprinted on the screen and remain visi-
ble.
1. Press the RATIO button repeatedly to select the desired picture format.
You can also adiust Aspect Ratio in the OPTION menu.
Set By Program
Select the proper picture proportion to match the source's image. (4:3 _ 4:3, 16:9 _ 16:9)
* €-_3
Choose 4_3 when you want to view a picture with an original 4:3 aspect ratio, with gray bars appearing at both
the left and right sides.
* 16_9
Choose 16_9when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.
Horizon
Choose Hogtie'on when you want to adiust the picture in a non-linear proportion, that is, more enlarged at both
sides, to create a spectacular view.
7-oom 1
Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions
of the picture will be cropped.
* Zoom 2
Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture tak-
ing a halfway trade off between alteration and screen coverage.
,, Cinema Zoom
Choose ¢;f,nema Zoom when you want to enlarge the picture in correct proportion. Note: When enlarging or
redudng the picture size, the image may become distorted.
You can adiust the enlarge proportion of Cinema Zoom using A /_" button. The adiustmont range is 1~16.
- Most movies are 24 framos/sec, but TV signal is 30 frames/sec.
This option lets the TV do 3:2 pulPdown operation for you to watch
movies at the best motion appearance.
1. Press the MENU button and then use A / _' button to select the OPTION menu.
2. Press the _ button and then use A / _' button to select Clne_z_ _2 _1[ode.
3. Press the _ button and then use A / _" button to select On or O1£
4. Press EXIT button to return to TV viewing or press MENU button to return to the
provious rnonu.
No_e: This feature operates only in 480i mode.
32 Plasma TV 206-4022