Sleep Timer / Auto Off - Zenith Z42PX2D Installation And Operating Manual

Operation
- The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off.
- You can also set up the Sleep Timer in the TIME menu.
1. Press the TIMER button repeatedly to select the number of minutes. First the OK option appears on the screen,
followed by the following sleep timer options: 10, 20, 30, 80, 90, 120, 180, and 240 minutes.
2. When the number of minutes you want is displayed on the screen, press the ENTER button. The timer begins to
count down from the number of minutes selected.
3. To check the remaining minutes before the TV turns off, press the TIMER button once.
4. To cancel the Sleep Timer, press the TmMER button repeatedly to select Oil.
- If set to on and there is no input signal, the TV turns off automatically after 10
minutes.
1. Press the MENU button and then use A / '_ button to select the TIME menu.
2. Press the _ button and then use A / _ button to select AutoO_.
3. Press the _ button and then use A / _' button to select On or O_£
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
206-4022 Owner's Manual 31