Assembling The Blower Tube - Craftsman INCREDI.PULL 316.794000 Operator's Manual

ASSEMBLING THE BLOWER TUBE
I, lw'°"'"O o vo'se ous e,so u '' oetothe l
unit, shut the unit off before removing or installing the blower tubes.
Installing the Flex Tube
1. Place a hose clamp over the
end of the flex tube (Fig. 1).
2. Slide the end of the flex tube
with the clamp on it over the
elbow tube and tighten the
screw on the hose clamp
(Fig. 1).
Installing the Upper Blower Tube
1. Place a hose clamp over the
other end of the flex tube
(Fig. 2). Fig. 1
2. Slide the end of the hose with the clamp on it over the to 3 end of the
upper blower tube and _ Flex
tighten the screw on the _ Tube
hose clamp (Fig. 2).
Installing the Lower Blower
Tube and Nozzle ) %2
1. Insert the bump on the upper Hose
blower tube into the bump Clamp"
slot on the lower blower tube
Upper
(Fig. 3).
_- Blower
2. While holding the upper Tube
blower tube, twist the lower
blower tube clockwise until it Fig. 2
locks into place (Fig. 3).
3. Insert the bump on the lower upper/owe
_ I
/ _}
blower tube into the bump BTuber \ , _1_ .....
slot on the nozzle (Fig. 4). _[__ '_
4. While holding the lower
blower tube, twist the nozzle Bump ..___
clockwise until it locks into
b_
Bump
place (Fig. 4). _ Slot
The completed blower tube
__"_C__
_ Lower
should look like Figure 7.
_ -_-_"
Blower
serious personal injury, [ Fig. 3
make sure that the I
Lower I
Blower I
blower tubes are
locked in place
or
Tube -_
f rm y nsta ed.
Bump
Secure the Throttle Cables
Bump
_ / Slot
Place a zip tie around the elbow _:: _
tube and the throttle cables, as _. .....
shown (Fig. 5). Tighten the zip tie,
making sure not to crimp the cables.
Nozzle
Fig. 4
_ Elbow Tube
Cables /_" \t_ =- Zip Tie
Adjusting the Throttle Grip
1. Move the throttle grip to a
location on the upper blower
tube that provides the best
grip (Fig. 6).
2. Using a T-20 Torx ®
screwdriver, tighten the two
screws at the bottom of the
throttle grip (Fig. 6).
Cables
Upper Blower Tube
Throttle Control
Lower Blower Tube
Nozzle
_f-_ Throttle
Up per L __ "_/ c°nt rol
Tube
T-20 Torx Screw
Fig. 6
Elbow Tube
Hose Clamp
Flex Tube
Hose Clamp
On/Off Switch
Cruise Control
Fig. 7
Fig. 5