Confirming The Projector Status (Status); Controlling The Projector (Control) - Sharp XG-PH70X Setup Manual

Controlling the Projector via LAN
Confirming the Projector
Status
(Status)
On this screen, you can confirm the projector
status. You can confirm the following items :
•
MAC Address
•
Power
•
Condition
•
Lamp Timer 1
•
Lamp Timer 2
•
Lamp Life 1
•
Lamp Life 2
•
Input
•
Signal Info
•
Serial Number
Note
• If you click the "Refresh" button before the
screen is displayed completely, an error
message ("Server Busy Error") will be dis-
played. Wait for a moment and then oper-
ate again.
• For details about each item, refer to the
projector's operation manual.
-24
Controlling the Projector
(Control)
On this screen, you can perform projector con-
trol. You can control the following items :
•
Power
•
Input Select
•
Volume
•
Mute (Audio)
•
Black Screen
Note
• If you click the "Refresh" button before the
screen is displayed completely, an error mes-
sage ("Server Busy Error") will be displayed.
Wait for a moment and then operate again.
• You cannot operate this page while the pro-
jector is warming up.
• While the projector is in standby mode, you
can only control "Power ON".
• For details about each item, refer to the
projector's operation manual.