Confirming The Projector Status (Status); Controlling The Projector (Control) - Sharp PG-F325W Setup Manual

Controlling the Projector via LAN
Confirming the Projector
Status
(Status)
On this screen, you can confirm the projector
status. You can confirm the following items :
MAC Address
• • • • •
Power
• • • • •
Condition
• • • • •
• • • • • Lamp Timer
Lamp Life
• • • • •
• • • • • Input
Signal Info
• • • • •
• • • • • Serial Number
Note
• If you click the "Refresh" button before the
screen is displayed completely, an error
message ("Server Busy Error") will be dis-
played. Wait for a moment and then oper-
ate again.
• For details about each item, refer to the
projector's operation manual.
-16
Controlling the Projector
(Control)
On this screen, you can perform projector
control. You can control the following items :
• • • • • Power
Input Select
• • • • •
• • • • • Volume
AV Mute
• • • • •
Note
• If you click the "Refresh" button before the
screen is displayed completely, an error mes-
sage ("Server Busy Error") will be displayed.
Wait for a moment and then operate again.
• You cannot operate this page while the pro-
jector is warming up.
• While the projector is in standby mode, you
can only control "Power ON".
• For details about each item, refer to the
projector's operation manual.