Broadcasting Using A Group Key - Sharp FO-B1600 Operation Manual

4
Press
5
Repeat Steps 3 and 4 for each of the other destinations to which you
wish to send the fax (maximum of 20).
6
When you are ready to begin transmission, press
•
A Transaction Report is automatically printed out after Broadcasting is
completed. Check the "Note" column of the report to see if any of the
destinations are marked "Busy" or have a communication error code. If so,
send the document to those destinations again.

Broadcasting using a Group Key

If the fax machines to which you want to broadcast have all been programmed
into one Group Key (see Storing numbers in Group Keys which follows), you
can perform the broadcasting operation using the following simplified
procedure:
1
Load the document(s).
•
If desired, press
the resolution and/or contrast.
2
Press the appropriate Group Key.
Transmission will begin.
to store the destination.
to set
RESOLUTION/
RECEPTION MODE
Sending a Fax From Memory
START/
MEMORY
.
READY TO SEND
17/G1
51