Broadcasting (Sending a Fax to Multiple Destinations)
4
Repeat Steps 2 and 3 for each of the other destinations to which you
wish to send the fax (maximum of 20).
•
To check your selected destinations, press
delete a destination, scroll to the destination and then press
6
When you are ready to begin transmission, press
•
A Transaction Report is automatically printed out after Broadcasting is
completed. Check the "Note" column of the report to see if any of the
destinations are marked "Busy" or have a communication error code. If so,
send the document to those destinations again.
Broadcasting using a Group Key
If the fax machines to which you want to broadcast have all been programmed
into one Group Key (see Storing numbers in Group Keys which follows), you
can perform the broadcasting operation using the following simplified
procedure:
1
Load the document(s).
•
If desired, press
resolution and/or contrast.
2
Press the appropriate Group Key.
Transmission will begin.
54
RESOLUTION/
RECEPTION MODE
to set the
to scroll through them. To
STOP
.
START
.
READY TO SEND
09/G1