Polling Security - Sharp FO-781 Operation Manual

Polling security

Polling Security allows you to prevent
unauthorized polling of your machine.
When this function is turned on,
polling will only take place when the
fax number of the polling fax machine
has been entered in your machine's
list of permitted fax numbers (called
"passcode numbers"). The number of
the polling fax must also be correctly
programmed into itself for
identification.
To use Polling Security, follow the
steps below to turn the function on,
and then enter permitted numbers as
shown on the following page.
1
Press these keys:
FUNCTION
SECURITY SELECT
2
Press 1 to turn polling security on,
or 2 to turn it off.
1
or
3
Press the START/MEMORY key
and then the STOP key.
START/MEMORY
3
Press 3
times
2
STOP
Polling (Requesting a Fax Transmission)
Storing and clearing fax
numbers for polling
permission
You can store up to 10 fax numbers
in your machine's list of permitted
numbers.
1
Press these keys:
FUNCTION
PASSCODE # MODE
2
Press 1 to store a number, or 2 to
clear a number.
1
3
Storing: Enter a 2-digit number
from 01 to 10. This number
identifies the fax number you will
store in the next step.
Clearing: Enter the number which
identifies the fax number you want
to clear, and go to Step 6.
3
Press 4
times
2
or
0 1
(Example)
73