Installing Printer Drivers From The Cd-Rom - Sharp AR-PB2 Supplemental Manual

Installing printer drivers from the CD-ROM

In the former version of the AR-PB2 Printer Expansion Kit, the printer drivers were supplied on
floppy disks. The printer drivers are currently supplied on a CD-ROM. Additional printer utilities
such as the Printer Status Monitor, Printer Administration Utility, and NW Setup are also included in
the CD-ROM. If you install these utilities, see their respective sections before installing them (pages
13 to 17). For installing the printer driver for Macintosh, see page 9, "Printer driver for Macintosh".
Using the installer in the CD-ROM (Windows 95/Windows 98/Windows NT 4.0)
NOTE The PPD printer driver must be installed using the plug & play feature or from the Add Printer Wizard. See "Installation
with Plug & Play or from the Add Printer Wizard" in the next section.
1. Start Windows.
2. Insert the supplied PRINTER UTILITIES CD-ROM into a CD-ROM drive.
N
If your computer is configured for auto start on the CD-ROM, proceed to step 5.
3. On the 'Start' menu, click 'Run'.
4. Enter the CD-ROM drive and setup command. Then click the 'OK' button.
Example: If the CD-ROM drive is designated as drive Q, type "Q:\Setup.exe" and click 'OK'.
5. The license agreement will be displayed. Read it and click 'Next' if you accept the agreement.
6. Select English as a language for software to be installed and click 'Next'.
N
The printer drivers and utilities that can be installed from the CD-ROM will be displayed.
4