Loading The Document - Sharp FO-225 Operation Manual

'\
PREPARING TO TRANSMIT A DOCUMENT
.
Loading the document
Up to 10 sheets can be placed in the feeder at one time (see "About the original" at the beginning
of this section for allowed sizes). These will be automatically fed into the machine starting from the
sheet on the bottom.
. If you need to send or copy more than IOsheets, place the additional sheets gently
and carefully in the feeder as the last sheet is being scanned. Do not try to force
them in, as this may cause double-feeding or jamming.
" If your document consists of several thick
sheets
which must be loaded one at a
time, insert each sheet into the maghine as the previous sheet is being scanned.
Insert gently to prevent double-feeding.
PROCEDURE
1.
2.
3.
Adjust the document guide to the width of your
document.
L
I
Place the document face down and push it gently
into the document feeder. The top edge of the
document should enter the machine first.
c The feeder will draw the leading edge of
the document into the machine. The dis-
play, which normally reads STAND-BY,
will change to SEND READY.
You can now either make resolution and/or con-
trast settings as described on the following page,
or dial the other party as described in the following
section, "Dialing and transmission".
-
I
BASIC OPERATIONS
3-3