Fitting The Printed Image To The Paper - Sharp AR-M250 series Online Manual

4 PRINTING FROM MACINTOSH

Fitting the printed image to the paper

The printer driver can adjust the size of the printed image to match the size of the paper loaded in the machine. (This function can
only be used in Mac OS X v10.4 to 10.4.8.)
Follow the steps shown below to use this function. The explanation below assumes that you intend to print a letter size document on
Ledger size paper.
CONTENTS
(2)
(1)
(3) (4)
1
Select [Paper Handling].
2
Check the size of the print image (for example:
Letter).
To change the print image size, use the "Paper Size"
menu that appears when [Page Setup] is selected.
3
Select [Scale to fit paper size].
4
Select the actual paper size to be used for
printing (for example: Ledger).
45