Sharp AR-M250 series Online Manual page 35

4 PRINTING FROM MACINTOSH
Basic printing
5
Configure print settings.
paper, Rotating the print image 180
a watermark, Stapling printed pages (when a finisher
is installed), Job control function (Mac OS 9.0 to 9.2.2
and Mac OS X v10.2 to 10.4)
The settings vary depending on the operating system
Note
version, the printer driver version, and the application.
6
Click the "Print" button .
CONTENTS
Click next to "Copies & Pages"
("General" in Mac OS 9.0 to 9.2.2)
and select the settings that you
wish to configure from the
pull-down menu. The
corresponding setting screen will
appear.
☞
Two-sided printing,Printing
multiple pages on one page,
Fitting the printed image to the
degrees,
Printing begins.
● The output tray can be selected in the key operator
Note
programs (see "OUTPUT TRAYS" in the key
operator's guide).
●
The output tray can be selected when selecting print
settings at the time of printing. Select the output tray in
"Output" in the "Printer Features" menu of the Print
window.
●
●
Printing
●
● If the paper type setting in the printer driver is different
from the bypass tray's paper type setting in the
machine, printing may stop. To resume printing, press
the [PRINT] key on the operation panel, touch the
[BYPASS TRAY] key in the touch panel, and specify
the same paper type as in the printer driver.
If you are using Mac OS 9.0 to 9.2.2, select the
output tray in "Output" in the "Output/Document
Style" menu of the Print window.
If you are using Mac OS X v10.1.5, select the output
tray in the "Output" tab in the "Printer Features" menu
of the Print Window.
If you are using Mac OS X v10.2.8, select the output
tray in "Output" in the "Advanced" menu of the Print
window.
(part 4)
35