Sharp AR-M250 series Online Manual page 62

5 OPERATION AT THE MACHINE
Configuring the printer condition settings
PCL SETTINGS
Item
PCL SYMBOL SET
SETTING
PCL FONT SETTINGS
LINE FEED CODE
WIDE A4
CONTENTS
Selections
1 - 35 This specifies which country's characters (PCL symbol set) are assigned to
certain of the symbols in the character code list. The factory default setting is
"3" (PC-8). The numbers corresponding to each PCL symbol set can be viewed
by printing "PCL SYMBOL SET LIST" in "LIST PRINT" in the custom settings.
☞
INTERNAL FONT (0 - This specifies which PCL font to use for printing. One font can be specified from
80), EXTENDED FONT among the internal fonts and extended fonts (when the barcode font kit is
(1 - ) installed). The factory default setting is "0" (internal font: Courier).
The fonts that are available can be viewed by printing the font list in "LIST
PRINT" in the custom settings. The font names, numbers assigned to each
font, and print samples appear in the list. A font is specified for PCL FONT
SETTINGS by entering the number assigned to the font.
☞
0 - 3 This specifies the line break code by means of a combination of the "CR"
(return) code, "LF" (line break) code, and "FF" (page break) code. The factory
default setting is printing based on the transmitted code. The setting can be
changed by selecting one of four combinations.
Enabled, Disabled (no This setting can be enabled to print 80 lines on A4 size paper with each line
checkmark) 10CPI font (English characters). When the setting is disabled (a checkmark
does not appear), each line is 78 characters long.
Printing the printer setting and font lists
Printing the printer setting and font lists
Description
(part 7)
62