Connecting To A Composite Video Source; Installing Batteries In The Remote Control - Epson VS400 User Manual
Epson projector user manual
Hide thumbs
Also See for VS400:
- Specifications (4 pages) ,
- Quick setup (4 pages) ,
- Declaration of conformity (4 pages)
Table of Contents
Advertisement
1. Make sure the projector and your video source are turned off.
2. Connect the S-Video cable to your video source's S-Video output port.
3. Connect the other end to the projector's S-Video port.
Parent topic:
Related references
Projector Parts - Rear
Connecting to a Composite Video Source
If your video source has a composite video port, you can connect it to the projector using an optional
RCA-style video or A/V cable.
1. Make sure the projector and your video source are turned off.
2. Connect the cable with the yellow connector to your video source's yellow video output port.
3. Connect the other end to the projector's Video port.
Parent topic:
Related references
Projector Parts - Rear
Installing Batteries in the Remote Control
The remote control uses the two AA batteries that came with the projector.
Connecting to Video Sources
Connecting to Video Sources
28
Advertisement
Table of Contents
