Using The Projector Help Displays; Solving Image Problems - Epson VS400 User Manual

Power light
Red
Red or flashing
red
Parent topic:

Using the Projector Help Displays

You can display information to help you solve common problems using the projector's Help system.
1. Turn on the projector.
2. Press the Help button on the projector or the remote control.
You see the Help menu.
3. Use the up and down arrow buttons to highlight the problem you want to solve.
4. Press Enter to view the solutions.
5. When you are finished, do one of the following:
• To select another problem to solve, press Esc.
• To exit the help system, press Help.
Parent topic:

Solving Image Problems

Check the solutions in these sections if you have any problems with projected images.
Solutions When No Image Appears
Solutions When "No Signal" Message Appears
Solutions When "Not Supported" Message Appears
Solutions When Only a Partial Image Appears
Solutions When the Image is Not Rectangular
Solutions When the Image Contains Noise or Static
Solutions When the Image is Fuzzy or Blurry
Solutions When the Image Brightness or Colors are Incorrect
Lamp light Temperature
light
Off Flashing red
Flashing red Flashing red
Solving Problems
Solving Problems
Status and solution
A fan or sensor has a problem. Turn the projector
off, unplug it, and contact Epson for help.
Internal projector error. Turn the projector off,
unplug it, and contact Epson for help.
100