Dell PowerEdge R620 Owner's Manual page 16

Item Indicator, Button, or
Connector
6 Video connector
7 USB connectors (2)
8 Ethernet connectors (4)
9 PCIe expansion card slot
(riser 3)
10 Power supply (PSU1)
11 Power supply (PSU2)
Figure 6. Back-Panel Features and Indicators—10 Hard Drive System and 8 Hard Drive System (3 PCIe Expansion Cards)
Item Indicator, Button, or
Connector
1 System identification button
16
Icon Description
Allows you to connect a VGA display to the system.
Allows you to connect USB devices to the system. The
ports are USB 2.0-compliant.
Four integrated 10/100/1000 Mbps NIC connectors
or
Four integrated connectors:
• Two integrated 10/100/1000 Mbps NIC connectors
• Two integrated 100 Mbps/1 Gbps/10 Gbps SFP+
connectors
Allows you to connect a PCIe expansion card.
AC 495 W, 750 W, or 1100 W
Or
DC 1100 W (when available)
Icon Description
The identification buttons on the front and back panels
can be used to locate a particular system within a rack.
10 Hard
Drive
System
8 Hard Drive
System
Press to toggle the system ID on and off. If the system
stops responding during POST, press and hold the system
ID button for more than five seconds to enter BIOS
progress mode.
When one of these buttons is pressed,
the system status indicator on the back
flashes until one of the buttons is
pressed again.
When one of these buttons is pressed,
the LCD panel on the front and the
system status indicator on the back
flashes until one of the buttons is
pressed again.