3Com FEM656C Quick Start Manual page 11

After you insert the Installation CD, you may see messages telling you
that the installation is preparing your system to run your LAN+Modem
card. The messages that you see depend on how your system was set up
and what utilities you have used.
Do not force the card into the slot or you may bend the
pins inside.
During the installation process, you may receive prompts for the PC Card
installation disk. Insert the Installation CD and select the path from the
drop-down list. Click OK. The path is d:\install\disks\win9x\drivers,
where d: is your CD-ROM drive.
During the installation process, you may receive prompts for the
Windows ME, Windows 98 or 95 installation CD. Insert the CD and
indicate the correct path.
If you have not previously installed networking, you may be prompted
for information about your network. See your network administrator for
this information.
Do not force the card into the slot or you may bend the
pins inside.
– 6 –