Connecting To External Equipment - Sharp DV-SR85S(B Operation Manual

Hide thumbs

Table Of Contents

Table of Contents

Note

• The unit is sending each video signals simultaneously. If you connected an S-VIDEO OUT and/or a COMPONENT

VIDEO OUTPUT with the VIDEO OUT (SCART), make sure your TV's input mode is set correctly according to the

connection you made.

• You will not be able to hear all of the sound being output by the unit if you use the Audio cables (commercially

available) to a monaural TV that has only one Audio input jack.

• Be sure that the colours of the jacks and plugs match up when connecting the cable.

• If you want to listen to the audio through audio equipment, connect only the S-video or Component video cable to the TV.

• If your TV is compatible with 525 or 625 progressive scanning and you want to enjoy that high quality picture,

you must connect the Component video cable to your TV's component Video input jacks (Y/P

progressive scanning mode. To set the mode, set "Video Out" to "Component Progressive (P)" in the "Video" of the

"Playback" menu so that "P.SCAN" will appear on the display of this unit. See pages 81-82 for more details.

• If your TV is not compatible with progressive scanning, use this unit in interlace mode. Make sure that no "P.SCAN"

is on the display of this unit. If so, set "Video Out" to "Component Interlace (I)" in the "Video" of the "Playback"

menu so that "P.SCAN" on the display of this unit will disappear.

• (Analogue) AUDIO OUT jacks and Scart terminal are not available on the DTS audio.

This unit has four input terminals, AV1, AV2 or AV3 on the rear panel and AV4 or AV5 on the front panel. Be sure that all

the units are off before making connections.

Recording from a DVD player, VCR or other Audio-Video equipment with a Scart terminal (AV2)

Note

• If the external equipment connected to the Scart terminal (AV2) supplies control voltage to this unit via Pin 8 of the

Scart cable, the display functions of the remote control cannot be seen on the TV. In this case, turn off the external

equipment to prevent control voltage, or make sure to use a Scart cable without Pin 8 for this connection.

• The AV2 (DECODER) connection is useful for playing back the picture only.

Even if an external equipment such as a DVD player can be delivered an RGB signals and your TV accepts them, this

unit only records a Composite video signal.

Recording from a camcorder or other Audio-Video equipment with no Scart terminal (AV3, AV4 or AV5)

If no S-Video input jack is available, connect to VIDEO input jack by using an RCA Video cable or DV input jack by using

DV cable. Those jacks are on the front panel.

AV3 (Rear)

COMPONENT

AUDIO IN

VIDEO OUTPUT

S-VIDEO

OUT

IN (AV3)

S-Video cable

(commercially available)

S-VIDEO OUT

AUDIO OUT

Note

• If you prefer better picture quality for the recordings from the external equipment, S-video connections such as

AV3 (rear) is recommended.

Connections

Connecting to a TV (cont'd)