Epson PowerLite S3 User Manual page 15

Adjusting the Image Quality
B
Adjust the tracking until the vertical stripes disappear
from the image.
Remote control
The tracking value increases or decreases each time a button is
pressed.
C
Press the [Menu] button to exit the configuration
menu.
The image will flash during continuous tracking
adjustment.
Adjusting the Sync
If flickering, fuzziness or interference appear in
computer or RGB video images, and this cannot
be fixed using automatic setup, you will need to
adjust the
using the following procedure.
Control panel
PROCEDURE
A
Sync (synchronisation)g manually
Select "Signal" from the configuration menu, and
then select "Sync."
For details on this operation, refer to "Using the Configuration
Menu."
sp.34
Check the buttons you can use and the operations they perform
in the guide at the bottom of the screen.
Remote control
15
Control panel