Clock Setting; Post Code - Sharp DV-HR300H Operation Manual

Function Setting

CLOCK SETTING

CLOCK
• The clock will normally be set using the VPS/PDC information when your Recorder
automatically tunes in the broadcast channels. If for any reason the VPS/PDC signals
are not present, your Recorder will not be able to set the clock. The "CLOCK" function
lets you set the clock manually.
3 For details, see page 27.
*

POST CODE

POST CODE
• This function should allow the Police to identify you as the owner of the Recorder if it is
stolen. Each time the Recorder is turned on, your postcode will be displayed for 5
seconds. Your postcode cannot be changed or removed without first entering the
correct PIN - number.
4 For details, see page 30.
*
98
*3
*4
TIME:XX:XX(24H)
DATE:Day/Month
YEAR:XX
ADJUST:
∗:AUTO/-:OFF
0000–9999