Functions Under Other Settings 2; Mode Setting - Sharp DV-HR300H Operation Manual

Functions under OTHER SETTINGS 2

This section explains various settings relating to input/output of video/audio signal, TV channel preset and clock.
• For details about each setting, see the corresponding pages.
MODE SETTING s page 95
MANUAL TUNING s page 97
CHANNEL SORT s page 97
CLOCK SETTING s page 98
POST CODE s page 98

MODE SETTING

NICAM
• This recorder can receive and record NICAM or A2 broadcasts. NICAM broadcasts will
be received when "AUTO" is selected in the NICAM setting. Depending on the
received programme, some NICAM or A2 broadcasts may not be in stereo.
L1 OUT
• This sets the type of video signal output from L1 (TV) according to the specification of
connected TV.
NOTE
• To view an RGB output video, press the TV/DVD button on the remote control and
switch to DVD mode.
L2 IN
• This sets the type of video signal input from L2 (DECODER/EXT).
Function Setting
AUTO
OFF
Y/C
RGB
COMP.
Y/C
COMP.
95